X-Fiber S6.8 PLUS

Rate this product

Invia

The safest hydrogen storage system in carbon fiber-coated aluminum cylinders with fast connection up to 300bar.

  • Lightness: at equal capacity, this cylinders are the lightest on the market, with approximately 30% less weight than cylinders composite with aluminium liner and 4 times lighter than steel cylinders.
  • Non-Limited life: in accordance with the EN12245 standard, in order to have this unique feature certified, cylinders must withstand over 12,000 cycles of filling up to test pressure, which is one and half times the ordinary working pressure. The non-limited life feature is highlighted, according to legislation, on the label of each cylinder with the letters “NLL” (“NON-LIMITED LIFE”).
  • High flame resistance.
  • Optimal impact resistance.
  • Pleasant aesthetics.
  • Extreme ease of cleaning and sanitisation: cylinders can be cleaned just like any household object. They can be simply wiped with a cloth soaked in alcohol or a non-toxic cleaning agent, without worrying about damaging the cylinder or using any special or sophisticated cleaning method.
  • Characterised by their high resistance to corrosive agents and corrosion.
  • Certification for underwater use to Test 7 of the standard UNI EN 12245.
  • Certification to salt spray test to 336 hours according to standard ASTM B 117.
  • Cylinders are made of a non-structural plastic liner wrapped in a structural composite layer made of resin-impregnated carbon fibre. The cylinders are then protected with caps and sleeves, according to the desired characteristics of the finished product and its intended use.
  • The replaceable internal nozzle allows a better internal inspection, since it can be unscrewed in order to make, for example, an endoscope evaluation. After careful technical assessment, if the component is damaged, it can be replaced again without removing the cylinder from its service, which, however, is unavoidable for other cylinders on the market, in case of damage to the valve thread, as it is made as a unique piece with the cylinder body and, therefore, not replaceable.
  • The cylinder is CE approved and satisfies the requirements of PED directive.
  • Made in Italy

    •    Water capacity: 7.2 l
    •    Life: Non-Limited Life
    •    Weight with finishings: 3745±240 g
    •    Diameter ∅:161±3 mm
    •    Length:545±5 mm
    •    Possible thread: M18x1.5; M25X2.0; 17E; 25E; 7/8" - 14UNF; 3/4" - 14 NGT; 1"-11 1/2 NGT
    •    Gas: UN 1002 Compressed Air, UN 1049 Compressed Hydrogen
    •    Certification: EN 12245:2009
    •    Filling pressure: 300 bar
    •    Test pressure: 450 bar

Similar products

Belong to the same category