HY-Anion XP
The Hy-Anion XP 2 kW is a compact, high-efficiency electrolyzer module developed by H2PLANET for the flexible, on-site production of green hydrogen. Based on innovative Anion Exchange Membrane (AEM) technology, this system combines the low capital costs of alkaline technology with the rapid dynamic response and compactness characteristic of PEM systems.
Designed in a 19" rack format (6U), the Hy-Anion XP integrates a compact stack, an electrolyte loop with an independent pump, a gas separation system, leak-monitoring sensors, and industrial telemetry.
The architecture is highly scalable and designed for easy maintenance, with connections located on the front panel—making it ideal for immediate integration into energy cabinets and containers.
By utilizing an anode free of precious group metals (PGM-free) and offering a direct output pressure of up to 10 barg or 35 barg, the Hy-Anion XP ensures lower energy consumption while eliminating or reducing the need for primary gas compression stages.
Designed in a 19" rack format (6U), the Hy-Anion XP integrates a compact stack, an electrolyte loop with an independent pump, a gas separation system, leak-monitoring sensors, and industrial telemetry.
The architecture is highly scalable and designed for easy maintenance, with connections located on the front panel—making it ideal for immediate integration into energy cabinets and containers.
By utilizing an anode free of precious group metals (PGM-free) and offering a direct output pressure of up to 10 barg or 35 barg, the Hy-Anion XP ensures lower energy consumption while eliminating or reducing the need for primary gas compression stages.
- Nominal Hydrogen (H2) Production: 500 Nl/h (approx. 1.08 kg/24h)
- Nominal Delivery Pressure: Selectable 10 bar or 35 bar
- Hydrogen Purity: ≥ 99.0% (standard wet gas) / ≥ 99.999% (with optional dryer module)
- Operating Electrical Power: 2.4 kW nominal (2.0 kW stack, 0.4 kW auxiliary BoP)
- Specific Energy Consumption: 45 kWh/kg-H2 (at stack level) / 54 kWh/kg-H2 (complete system)
- Electrolyzer Efficiency (HHV): 88% BOL (Beginning of Life)
- Power Supply: AC 200–240 V single-phase (50/60 Hz), C19/C20 connector (16 A)
- Feedwater Quality: Deionized/demineralized water ≤ 1 µS/cm at 25°C
- Water Consumption: Approx. 0.55 L/h at nominal load
- Electrolyte: Potassium Hydroxide (KOH) diluted to 0.1–1 M, with forced circulation at 2–5 L/min
- Dimensions and Form Factor: 482 mm (W) × 647 mm (D) × 266 mm (H) (Standard 19" rack, 6U height)
- Weight: 51.3 kg (dry) / approx. 56 kg (with initial electrolyte charge)
- Communication & Control: Ethernet RJ45 (10/100BASE-T), Modbus TCP/IP and MQTT protocols
Similar products
Belong to the same category
